Our proprietary system is the best in the industry! Watch this time lapse video of one of our installations to see it in action.
THE RV ARMOR EXPERIENCE
Our goal is to help you have a lifetime of fun with the last RV roof you will ever need. Guaranteed! That’s why we’ve made it easy to get a new roof put on exactly where you are.
Give us a call 855-782-7667! One of our team members will get your questions answered and help you place your order for your new RV Armor roof. Once the order is confirmed, you will be assigned a service advisor to help you through the entire process!
Your service advisor will help you with everything in the process! They will schedule a technician to come to you, handle paperwork, collect payment, and ensure you get your warranty and customer care package once the job is complete!
Your certified technician will arrive on site with everything required to complete the job. Over 2-3 days, your tech will apply the RV Armor roofing system to your RV. Just relax and watch as your tech puts on the the last roof you will ever need!
Welcome to the family! Our warranty is a True Lifetime Material and Labor Warranty. It is Fully Transferable, Non-Prorated, and is tracked by the VIN # of your RV. Now have a lifetime of fun in your RV Armor protected RV!
PROPRIETARY PROCESS & PRODUCTS
Our process involves different RV Armor Products that are applied in a unique sequence by certified technicians. The result is a custom fit seamless roof system for your RV!
FULL INSTALLATION EXAMPLE
In this example, the RV Armor System is applied to a rubber roof.
After a thorough roof inspection, the first step is to sweep to remove dust and accumulated dirt, followed by a wipe-down with denatured alcohol.
Inspect and clean the sealant around all vents and skylights. Cracked or peeling sealant would be scraped off and resealed.
The roof is inspected for underlayment starting to delaminate. If spots are found, first a small L shaped slit is cut in the membrane above.
The de-lamination is alleviated by driving a self-tapping screw.
The area is then covered with foil tape. This spot is now ready to be covered by the RV Armor System and less likely to continue the de-lamination.
The plumbing vent covers are removed, and the sealant around them is cleaned and inspected.
Primer is cut in with a brush along the edges, near the front and rear caps, and around the vents and skylights.
Primer cut-in is complete and ready for the main primer coat.
Entire roof is covered with primer in preparation for base coat.
Primer coat is ready to receive base coat.
Prior to application of the gray base coat, the roof is re-caulked along the edges.
Sealant is applied along the front and rear caps a needed.
Sealant is applied around the antenna, vents and skylights with self-leveling sealant.
After the self-leveling sealant is applied, fabric mesh is gently pushed into it while it is still wet, helping to strengthen the area and prevent cracking once cured.
Gray coating is first cut in around vents and skylights, etc., before it is rolled on. It will then cure overnight.
Remaining gray coat is rolled on after initial cut-in.
SEALANT & TAPE
Another coat of sealant is applied on top of mesh tape in all areas, then masking tape is applied along the edges.
Finally, the white coat is laid on nice and thick. Then the masking tape is removed, leaving a nice, clean exterior edge.
This is a completed roof! From here, the job is confirmed by the tech and the Lifetime Guarantee package is sent to the new roof owner!
This roof is now guaranteed for life! No more seams, No more maintenance, No more treatments. For the life of the RV! That’s the RV Armor experience!
Download the full article from Trailer Life Magazine explaining our RV Armor Process.